Add your answer here.
Check out some similar questions!
Line voltage thermostat wiring: replace single pole with double pole [ 7 Answers ]
Greetings, Current setup: Three small rooms, each with its own 120 volt baseboard electric heat, each with a 25 year old wall mount single pole, line voltage thermostat. All 3 room heaters are on the same breaker. Current single pole thermostat connections have 3 wires: black, red and white....
How to change a 20 amp single pole to a ge 45 amp circuit breaker one pole? [ 5 Answers ]
I have a 20 amp service in my garage and I want to plug in my camper. The camper has an inverter that says it is rated for 45 amps. I changed the breaker to a 30 amp but it keeps popping the GFI outlet. How do I convert this amperage to meet the needs of the camper?
How can I lift or raise a pole that has settled or sunk in an existing pole barn? [ 4 Answers ]
My 25 year old pole barn has a couple of poles that have sunk six to eight inches and I want to jack them up in place. Is there a jack designed for this purpose or a suggested method?
Two Single Pole GFI's = one Double Pole 220v GFI? [ 6 Answers ]
Hello there, Installing a pool motor, 220v hayward northstar two speed. Could not find a double pole 40 amp GFI, electric supply store recommended two single pole 20A GFI's sharing a neutral? Does this make sense. I have a 40amp double pole in the main feeding the sub via the sub panel...
One pole of untied double-pole circuit breaker breaks [ 5 Answers ]
I recently purchased a new dryer (220 v appliance) to replace an older model. The old dryer was connected to the panel via a double-pole breaker except that there was no clip or tie between the poles. I changed the location of the outlet when installing the new dryer, replacing the cable with the...
View more Electrical & Lighting questions Search