Looking to buy a kenmore 20 gallon water heater.110 has 2000 watt element 220 has 4000 element.I was told either way they will use the same amount of electric just the 220 will heat up more quick .Is this the case.I ask because sister said she had a 110 dryer once and electric went through the...

I am trying to hook up 2 hot water heaters in one house, (natural gas). I know how to hook up one tank, but not 2. please help.:confused:

When I moved into this house the hot water heater (3 years old now, gas unit) was hooked up to the existing system with copper fittings. The whole house has copper supply lines. 1. Should I put dielectric fittings between the hot water heater and the copper lines? I know the dissimilar...

I am putting in a 220 eletric cove heater in my entry. The manual says I can run standard 12 2 with ground for the wiring. I understand that I run it to a box in the wall first for the thermastat then from there I was going to run it to a box on the wall located where the end of the unit would...

Hi . I am having probles setting up 2 baseboard heaters in my living room. I have the two of heaters connected and both wires going back to a thermostat box. Any help with how to connect the two heaters to a thermostat. I have a thermostat with a L1 and a t1 marked on them. I took it as L1 to main...