Ask Experts Questions for FREE Help !
Ask
    nd76's Avatar
    nd76 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2006, 09:05 AM
    20 amp circuit
    Would it be o.k. to have 10 gauge wire ran for a 20 amp circuit?
    omzig's Avatar
    omzig Posts: 119, Reputation: 19
    Junior Member
    		  
    #2

    Nov 12, 2006, 09:20 AM
    Yes, in fact it is often done for long runs to reduce voltage drop.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Nov 12, 2006, 11:11 AM
    It better be. I have at least 1/2 dozen of them, maybe even a 15 amp. I came by a coil of 10-2 with ground when I worked for a wire and cable company. I also recycled one that used to run to the AC to give the refrigerator its private circuit.

    Of course, where I live, there is no building inspection. I must say, the #10 is harder to work with.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maximum load on 20 amp circuit breaker [ 14 Answers ]

I am aware of certain normal maximums. I guess I'm looking for somebody to tell me that I'm pushing things too far, or not. I want to hook up a portable air conditioner (Sunpentown WA-1220E) which is rated at 950 watts (and, mysteriously, at 9.0 amps) along with an HP 4Si printer, which is rated...

20 AMP Circuit with 15 AMP Receptical, is this OK, and in code? [ 5 Answers ]

This is sort of similar to the other thread, but my problem is the house I bought is wired with 12, all the breakers are 20AMP except for the 30AMP for the AC and Dryer. When me and my dad were changing the power recepticals, which were 15 amp, someone told us that we should have 20 recepticals, or...

3-amp fuse on circuit board [ 7 Answers ]

I've been having an intermittant problem where the 3-amp fuse on the circuit board keeps burning out. Lately, the problem has occurred in the late afternoon (3-7pm) such that when I replace the fuse, it will last for 3-4 minutes before blowing again. If I wait until late in the evening to turn on...

How many watts can a 15 amp circuit support? [ 10 Answers ]

Recently had my 35 year old Federal Pacific service entrance replaced. As I was labelling the circuits, I found that the 15 amp furnace fan circuit also has a bunch of lights on it. If I add them all up plus the 12 amps for the fan (that's what's on the fan label and I assume it's the max load at...

15 amp circuit load [ 1 Answers ]

Will a 15 amp circuit safely handle a 2000 watt resistance heater?

View more questions Search