Ask Experts Questions for FREE Help !
Ask
    ronron1's Avatar
    ronron1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2009, 03:17 AM
    How to compute for a 3 phase main breaker and feeder?
    I like to know how to compute for the main breaker and main feeder line for a three phase supply and their branches are just single phase?
    danar's Avatar
    danar Posts: 69, Reputation: 2
    Junior Member
    		  
    #2

    Nov 22, 2009, 11:45 PM

    1. make a load schedule for a three phase distribution panel
    2. distribute the single phase load equally on the phases A,B,C
    3. Add the total current for eache phase
    4. select the biggest current if the load is not balance. And multiply by 1.25 that will be the feeder size..
    5. the biggest current times 2.5 will be the size of your breaker.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between Main Lug and Main Breaker Panel [ 8 Answers ]

What is the difference between a Main Breaker Panel and a Main Lug Panel and can either be used in new residential construction.

Low voltage in house on main feeder wires [ 2 Answers ]

Ok. I have a cabin that has new electrical wiring. The two hots coming from the meter go directly to 8 RV hookups then to the cabin. A few days ago the electric was working fine, then I went down to turn the hot water heater on (at the breaker box in the cabin) and noticed there was no...

Load Center Main Lug or Main Breaker for the Attic [ 5 Answers ]

I have a large attic (on 3rd floor), 38'x28', which is unfinished space. The 2nd floor central air-condition is located there and used to be fed by a 60 feet of 12/3 cable (I changed the cable to 10/3 to reduce the chance of voltage drop) and it's fed by a dual 15A breaker (240v breaker) in the...

Can I convert a main breaker Cutler Hammer loadcenter to main lug? [ 1 Answers ]

I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks

Feeder line from main panel [ 5 Answers ]

I want to run a feeder line from one building to another in a 2 in. underground conduit.about 100 ft. run what size alum. Wire will I need for 125 amp sub panel

View more questions Search