Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Diverter stem installation - three handle shower & tub faucet
[ 4 Answers ]
The house is well over 25 years of age and I have replaced both hot and cold water valves and tub faucet without removal of bath and shower stall tiles - still look good. Purchased a diverter stem (Galtmaster tub and shower models - 1963 to 65). With the old diverter I would turn clockwise to have...
Shower Valve Stem Adapter
[ 1 Answers ]
I have an old Symmons shower valuve and recently purchased a new Kohler shower head/handel system. The problem is, the stem valve for the Kohler shower handel doesn't fit onto the old shower valve? I JUST finished a tile surround and am not about to open that wall back up to instal a new shower...
Stuck valve stem
[ 1 Answers ]
I'm trying to remove the valve stem in the shower (hot water) and I can't get the stem to come out. The piece that has the flat sides (only 2) I believe is supposed to unscrew and it won't budge. I would like to avoid breaking it but it won't budge. What can I try?
Single price pfister stem valve
[ 2 Answers ]
I have a Single turn knob for my shower made By Price Pfister. The valve needs replacing. Removing the knob and un-screwing the metal Circular cylinder, I’m left with the stem valve. From the front, It is circular with two tabs, one On top and bottom. With a screw driver from the Back tabs,...
Tub/shower valve stem
[ 7 Answers ]
Hello,I will like to know can a tub valve stem get restricted with sediment and block Water flow till you get hardly nothing or just a stream?It has been leaking for Quite a while now and has gotten worser.I already have an existing sediment Build up from galvanized pipes.I been tapping the... View more questions Search
|