Ask Experts Questions for FREE Help !
Ask
    B28's Avatar
    B28 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 9, 2007, 09:36 PM
    Instructions for feather ornaments
    I'm trying to make feather ornaments... I can't find instructions anywhere. It's pretty basic (I think) feathers covering a styrofoam ball. It has taken me 4 hours to make one ball - way too long. I really would appreciate your help. Thanks so much B28
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
     
    #2

    Oct 12, 2007, 12:25 AM
    I don't know what you have been using, but I would think that a hot glue gun should work just fine. These are very inexpensive and can be found at dollar type stores. Please let me know. Thank you.
    grammadidi's Avatar
    grammadidi Posts: 1,182, Reputation: 468
    Ultra Member
     
    #3

    Oct 12, 2007, 12:34 AM
    Have you considered purchasing a kit to make a feather ornament and using the instructions to guide you to make your own?

    Hugs, Didi
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
     
    #4

    Oct 12, 2007, 12:51 AM
    Quote Originally Posted by grammadidi
    Have you considered purchasing a kit to make a feather ornament and using the instructions to guide you to make your own?

    Hugs, Didi
    Where would you suggest obtaining such a kit?
    grammadidi's Avatar
    grammadidi Posts: 1,182, Reputation: 468
    Ultra Member
     
    #5

    Oct 12, 2007, 01:15 AM
    Quote Originally Posted by Clough
    Where would you suggest obtaining such a kit?
    Hmmmm... Michael's?? I really don't know! I assumed if someone was making one, that there must be kits out there! :) I am also thinking that one of the staff members at a craft store such as Michael's would have some good ideas on how to do it.

    I thought I had seen instructions online before, but in seeking again, so far, the only feather ball ideas I can find online are for the clear glass balls being filled with feathers (and some sparkles).

    I think if I were attempting to make one I would use rather large feathers and a glue gun with clear glue sticks.

    Hugs, Didi
    ChihuahuaMomma's Avatar
    ChihuahuaMomma Posts: 7,378, Reputation: 608
    Vision Expert
     
    #6

    Oct 16, 2007, 01:10 AM
    I made a feather tapery... like a small christmas tree sort of deal... I just stuck the feathers into the styrofoam then put a dab of hot glue over the entrance hole...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Feather Fascinator [ 2 Answers ]

Hi just logged in as I need some help. I need to make a feather fascinator for my daughters wedding on 3.3.07. I have the combs feathers and ribbon but have no clue where to start. I do not suit wearing hats and to buy one is too expensive. Please can you help me.:)

Feather Lite Plus Weedeater [ 3 Answers ]

I have a 7 year old Feather Lite Plus weedeater. Just resently it's gotten to where it will not stay started. It starts just fine, it just won't stay started. I've checked the filter, it's clean. I've checked the primer pump and it flows fine. Any advice?

Feather Lite Weedeater. [ 1 Answers ]

Hi I tried starting my feather lite weedeater for the first time this summer, it ran for a few minutes then died. I put a new spark plug in it, cleaned the filter, but still won't start, when I pull the starter cord, gas is right mixture, and new. HELP?? Thank you. Slade.

Feather lit weed eater [ 2 Answers ]

I have a feather lite weedeater. It won't prime... it acts like the hoses are hooked up backward? They seem to fit correctly... could something be pluged up to keep the gas from flowing into the prime bulb?

Starting Feather Lite X200 [ 1 Answers ]

I need some help, I have lost my owner's manual for my feather lite X200 Trimmer. Can you help me with how to start sequence. We have not used in over a year.


View more questions Search