Add your answer here.
Check out some similar questions!
What is the difference between parts injected in PVC and parts Injected in ABS? [ 1 Answers ]
What is the difference between parts injected in PVC and parts Injected in ABS. I am interested in the structural properties that can give both materials. Is better to use ABS in injected parts that will be used as structural positions or will be used as a part of an assembly.
My toilet is raised about six inches off the floor and I would like to make it flush [ 2 Answers ]
My toilet is raised about six inches off the floor on a square pedestal and I would like to remove the pedestal and make the toilet flush with the floor. We live in an older mobile home and have recently been told by a plumber that this isn't possible without spending quite a bit of money - which...
How do I make my stair treads longer, right know they are only 7 or 8 inches [ 2 Answers ]
I was wondering how to make my stair treads longer right now they are only about 7 or 8 inches and my foot will not fit on them I have already had someone fall down them due being so small I was wanting to get they to about 10 inches or so without ripping everything out and starting from scratch
Is 3 inches enough? [ 1 Answers ]
I'm growing out my hair color to see just how gray I am. I thinking of keeping it gray depending on how it looks. I was wondering if I cut it off as short as I can, how many inches should I leave on my head to not look totally ridiculous? Is 3 inches enough. I have thick but fine hair.
Two parts: moving toilet over 4" and connecting to 4" black plastic to make shower [ 3 Answers ]
Hi friends, I have a concrete slab foundation. In one full bath, I'm changing out the tub to put in a sauna tub, going from 60x30 to 60x32. The toilet is right next to the tub, so I want to move the toilet over at least 4" and change the sink to a pedastal sink to make room for the move for...
View more Crafts questions Search