Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Construction   »   Termite damage in beam supporting floor joists

 
Question Tools Search this Question Display Modes
Question
 
 
#1  
Old Jul 27, 2007, 05:43 AM
LarryMc
New Member
LarryMc is offline
 
Join Date: Jul 2007
Posts: 3
LarryMc See this member's comment history on his/her Profile page.
Termite damage in beam supporting floor joists

Termites got into the end of a beam supporting the floor joists in a crawl space under the first floor. I think I can use floor jacks and termporary beams on either side of the damaged beam to support the floor, then cut our the damaged beam. It is about 8 ft from the concrete foundation wall to the first steel post supporting the beam (the termite damage is only in the first 2 - 3 ft from the foundation). The beam is double thickness (2 x 10 I think). Should I cut the beam so that the two 2 x 10's are staggered (how much stagger?) with the stagger right over the steel post? the replace and bolt (and glue?) throught the stagger between the new and old beams.

Thanks

Reply With Quote
 
     

Answers
 
 
Old Jul 27, 2007, 01:19 PM   #2  
Kstar4u
Full Member
Kstar4u is offline
 
Join Date: Dec 2006
Location: Southern California - High Desert
Posts: 229
Kstar4u See this member's comment history on his/her Profile page.
First things first... if you've discovered termite damage at all... the most important thing to address before you make repairs is the infestation. You certainly don't want to "feed" those critters with some fresh "food" that will enable their colony to grow and cause additional damage. I'm assuming that the type of termites that you are dealing with are "subterranean" termites. Have you contacted any professional termite control folks?

Chances are good that if you have termites present in one location ... they may be found elsewhere in your structure. Once you can be reasonably confident that they are gone, or have a chemical barrier in place to prevent further activity... then the repair(s) should be done.

As far as your repair questions are concerned... I would recommend at least 4 feet of overlap (staggering) of the floor joists/floor support beams and using two 1/2" or 5/8" bolts and washers every 16" to laminate the two 2X boards.

Good luck (I always try to over-build at the foundation level)
  Reply With Quote
 
     
 
 
Old Jul 27, 2007, 01:29 PM   #3  
LarryMc
New Member
LarryMc is offline
 
Join Date: Jul 2007
Posts: 3
LarryMc See this member's comment history on his/her Profile page.
Thanks, yes I didn't mention that the termites were baited and they took enough bait back to the nest that they should be destroyed. In New England they do not appear to set up barriers anymore - they surround the house with traps and when termites are found they are baited. I am pretty confident they are gone - it is a necessary problem if you want to live in the forest.

Thanks for the rec. I probably would have only overlapped them about 2 ft - 4 ft makes sense.

Larry
  Reply With Quote
 
     


Question Tools Search this Question
Search this Question:

Advanced Search
Display Modes

 
Similar Sponsors

Similar Questions
Question Asker Topic Answers Last Post
Need to know how to Replace a termite damaged beam in basement. dmccue Construction 2 Jun 10, 2007 06:14 AM
Termite Damage dave_s Interior Home Improvement 0 May 19, 2007 07:03 PM
Holes in floor joists amyb Plumbing 4 Mar 20, 2007 06:45 PM
proper underlayment for vinyl floor starting at floor joists pwd77 Construction 2 Dec 16, 2006 08:09 AM
How big of a beam should I use for a supporting wall? MIademarco Construction 1 Jan 6, 2005 05:06 AM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 05:52 AM.

Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.