Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Doors
[ 2 Answers ]
What is the opening size I need to cut when installing a prehung door on a wall?
Prehung Doors
[ 2 Answers ]
I have several doors areas framed out in my basement with the ceiling being low because of vents. In several of these areas doors will be installed. I am looking to install split jamb prehung interior doors but there is approximately only 1 to 1 1/2 inch of header to the ceiling. In other words the...
Shower doors & deco tile
[ 2 Answers ]
:confused: I'm installing a bypass (2 sliding doors) bath and shower door on a 5ft tub. Problem is that I have decorative tile molding wrapping the entire bathroom including the bath tub enclosure, and the deco molding sticks out (not flush with wall tile) about 1/4 inch so the side rails (wall...
Arranging chairs in a sitting room with too many doors.
[ 1 Answers ]
My sitting room has too many doors and as such it is a bit difficult arranging the seats especially now that we need to fit in a TV and other furnitures. How do I solve this problem.
Please HELP! Windows Worms Doors Cleaner...
[ 13 Answers ]
Hi to every one! I would like to know if I have my computer set to be the most safer possible, so I downloaded Windows Worms Doors Cleaner and took a look at the resault, and I found the following ports opened. Is this bad? http://img200.exs.cx/img200/738/wwdc10at.th.jpg (save to disk for... View more questions Search
|