Ask Experts Questions for FREE Help !
Ask
    stupid plumbing's Avatar
    stupid plumbing Posts: 13, Reputation: 1
    New Member
    		  
    #1

    Oct 27, 2010, 01:09 PM
    header size
    does anyone know what the universal code is for a 16ft garage door header on a gable end, so not load berring, do two 2X12's work or do you have to use lam beams thanks, I live in North Dakota
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 27, 2010, 01:38 PM

    There is not "universal code" but I am sure your state or county has a code you must follow. Call them to be sure you are in code, did you pull a permit? Normally 2 2x12 with a layer of 1/2' plywood between them nailed and glued together will be acceptable.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size lam beam header is needed to clear span a 30 feet? [ 2 Answers ]

The beam is needed in a 30x40 garage. We are using trusses that are speced to clear span 40 feet but want the extra support in the center.

Header size [ 3 Answers ]

I live in a one story rancher in New Jersey. I am looking to replace my front window with a bay window. Currently the front window is two double hung totaling 55 inches wide. There is a double 2x6 as a header now. The bay window is 84 inches wide. Can I use a double 2x8 or does it have to be...

Bearing wall header size [ 1 Answers ]

I would like to replace the outside wall in a mobil home The span is 15'7" where the sliding door is.

Header size for load bearing wall [ 2 Answers ]

I live is a colonial 2 story home. I am currently remodeling my kitchen/dining room. I currently have a header of 68 inches on the load bearing wall between my dining room and living room. I want to open that up to 84 inches. Can I use dimensional lumber to frame out the header and if so what...

Header size requirement [ 1 Answers ]

What size header is required when opening a load bearing wall in a basement of a 1 story house. Span is to be 109 inches, inside jack stud to jack stud? Thanks much

View more questions Search