Ask Experts Questions for FREE Help !
Ask
    joanbob's Avatar
    joanbob Posts: 5, Reputation: 1
    New Member
     
    #1

    May 29, 2009, 10:44 AM
    Getting Screws out of redwood decking.
    I have a redwood deck I want to remove. The problem is, I can't get the screws out that are in the decking. I tried with my Black and Decker 3.5 amp power drill in reverse mode, but the screws didn't budge. What kind of power drill do I need?
    dawgsnkats's Avatar
    dawgsnkats Posts: 130, Reputation: 7
    Junior Member
     
    #2

    May 29, 2009, 11:47 AM

    Torque is what you need. Try a 18v dewalt impact driver. A little pricey but has the torque needing to remove the screw. Is the deck real redwood or is it pine painted red? What type of screws? If they are galvenized then they should come out pretty easy. I assume you are putting plenty of pressure on the back end of the drill/driver. Getting the screw started is the key. Good luck!
    jmjoseph's Avatar
    jmjoseph Posts: 2,727, Reputation: 1244
    Ultra Member
     
    #3

    May 29, 2009, 11:49 AM
    Buy or BORROW an 18 volt or maybe a 24 volt drill. I'm talking about cordless drills. Talk to the salesperson at the store about an electric (with cord) one of comparable strength. They have a special kit now that is made for stripped-out screws and bolts too. There're typically called screw extractors or easy-outs, but B&D makes this new deal.
    joanbob's Avatar
    joanbob Posts: 5, Reputation: 1
    New Member
     
    #4

    May 29, 2009, 06:36 PM
    dawgsnkats, yes, it's real redwood. It's a philp's head screw, I don't know if it's galvanized. Yes, I applied pressure to the back of the drill. I think it's torque I need. I actually could remove the screws with just a regular screwdriver, but I think it would be faster and easier with a drill with enough torque. Thanks for the suggetions, I check out if I can rent one.
    dawgsnkats's Avatar
    dawgsnkats Posts: 130, Reputation: 7
    Junior Member
     
    #5

    May 29, 2009, 09:13 PM

    The problem I have had with redwood is that it swells and shrinks around the screw over the years. This is a great thing if you want to keep your deck, not good for demolition. Another option would be to cut the pieces on either side of the fastening point with a sawzall or chain saw and remove by pieces. This may be a quicker option than removing all of the screws.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #6

    May 29, 2009, 10:31 PM

    Get a drill with hammer drill option.

    If removing the whole deck, then would be easier too cut it as dawgsnkats said.

    Good luck

    Chuck
    joanbob's Avatar
    joanbob Posts: 5, Reputation: 1
    New Member
     
    #7

    May 30, 2009, 12:58 PM

    Thanks for all your ideas you guys.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #8

    May 31, 2009, 07:32 PM

    Skip the battery models and just use a corded drill that has more torque. Most 1/2" drill can do the job.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What's the best redwood deck sealer? [ 1 Answers ]

What would you recommend as the best redwood deck sealer? I've got everything stripped down and ready to go. I live in southern California and the deck gets a lot of sun and some weather. I want something that can stand up to the constant sun. Another important factor is ease of use and when it's...

TREK decking [ 2 Answers ]

Question, I have a TREK deck. First and second floor. Will the posts hold nails? And if they do, what kind. I would like to hand a large lantern that is secured by a metal hanging post that takes two of something. HELP

Decking, Trek [ 1 Answers ]

Can Trek Decking be painted?

Trek Decking [ 2 Answers ]

Would pressure washing my trek deck void my warranty at all?

Decking on a Slope [ 3 Answers ]

We have a pool in our back yard with a ten foot concrete decking sourrounding it. We would like to extend a wood or simulated wood decking an additional 20 feet over an area that slopes down the side of a hill. The slope drops approx. 1:1 and I'm trying to figure out what type of footing I need...


View more questions Search