Ask Experts Questions for FREE Help !
Ask
    cornedbeef's Avatar
    cornedbeef Posts: 152, Reputation: 4
    Junior Member
     
    #1

    Aug 19, 2008, 04:56 PM
    virtually every web page visited shows: (not responding)
    Hi all,
    For the past 2 weeks I have been having real problems. I am wondering if I have a virus or something?
    Firstly, the PC runs fine for around 2 or 3 minutes then it slows right down and loading pages seems to take a minute or so between pages.
    The next thing that happens is the large timer comes up followed by the message "( Not Responding)"
    When I press the cross to cancel the web page it then takes of all others that are on the task bar.

    Can anyone help please.
    Cheers
    Richard.
    PS I have tried 2 system restarts but to no avail.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
     
    #2

    Aug 19, 2008, 05:18 PM
    Any changes that either happened or that you perhaps made to your computer around the time that the problem started; particularly any software or hardware that you installed or setup.

    Check your startup to see if any odd apps may be starting with windows.
    Start, run, type msconfig and go to startup tab - anything look odd or do not know what it is?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Aug 19, 2008, 06:46 PM
    Look at the process list and she which process is using all the CPU time. There is an issue where the indexing process goes nuts at times.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
     
    #4

    Aug 19, 2008, 07:51 PM
    As mentioned, check your processes in taskmgr to see if something may be running not sure about

    Are you using a firewall or a new feature/add-on for your browser perhaps installed recently?

    Any changes that either happened or that you perhaps made to your computer around the time that the problem started

    You can also check what add-ons may be in use with your browser

    Click on tools and then go to Manage add-ons and click Enable/disable add-ons
    -highlight Add-ons currently loaded in Internet Explorer
    -Look through the list and again see if something looks odd or you do not know what it may be used for under the enabled section of the view

    Also check your add remove programs in control panel to see if there may be something installed that you are/were not aware of
    cogs's Avatar
    cogs Posts: 415, Reputation: 27
    Full Member
     
    #5

    Aug 20, 2008, 08:16 PM
    What connection do you have, lan, dsl, cable, router, dialup, etc?
    cornedbeef's Avatar
    cornedbeef Posts: 152, Reputation: 4
    Junior Member
     
    #6

    Aug 21, 2008, 06:37 AM
    Hi Cogs,
    I have a cable connection.
    Cheers
    cornedbeef's Avatar
    cornedbeef Posts: 152, Reputation: 4
    Junior Member
     
    #7

    Aug 21, 2008, 06:54 AM
    Another thing I have noticed is that, often, when I have several pages on the go, the Yahoo mail page keeps loading it self in priority over the others. When I X the page it takes all the others down with it. I then have to start Firefox again.
    Could there be a problem,i.e a virus within Yahoo?
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
     
    #8

    Aug 21, 2008, 08:59 AM
    What was mentioned above about CPU usage

    Right click on taskbar and click task mgr, now look at the processes tab and look for any programs there running that may look unfamiliar to you - if not sure about any and you can always post them here

    On the right side you will see Mem Usage - see which few programs are taking up the most memory
    cogs's Avatar
    cogs Posts: 415, Reputation: 27
    Full Member
     
    #9

    Aug 21, 2008, 03:28 PM
    OK cornedbeef... Yahoo is aggressive by trying to bring it to the front, so that's normal. On a cable connection, sometimes you get lags. Also, if you're not on a work network, but on a personal computer, then you can try this:
    Start/run/type 'cmd'/type 'ipconfig /flushdns'
    (without the quotes '', and you need to type that last/ before flushdns, cause it's a switch)
    This will clear your dns cache. By the way, good job using Firefox.
    cornedbeef's Avatar
    cornedbeef Posts: 152, Reputation: 4
    Junior Member
     
    #10

    Aug 21, 2008, 04:13 PM
    I have typed "cmd/ipconfig/flushdns" but it is not recognized.
    JBeaucaire's Avatar
    JBeaucaire Posts: 5,426, Reputation: 997
    Software Expert
     
    #11

    Aug 21, 2008, 04:22 PM
    3 steps:
    • START > RUN
    • cmd (press enter)
    • ipconfig /flushdns (press enter)



    Notice there is a space after ipconfig...
    cogs's Avatar
    cogs Posts: 415, Reputation: 27
    Full Member
     
    #12

    Aug 21, 2008, 07:39 PM
    OK, I see what you're doing about the tabs closing. In Firefox, the x at the right closes all the tabs. If you only want one tab closed, you can do one of two things:
    press the x on the tab itself (if it has one) to only close that tab. OR,
    right click on the tab you want close, and choose 'close tab'. Be sure not to press 'close all tabs'.

    also, look at your post above for the explanation on clearing the cache, cause I added more to yours.
    cornedbeef's Avatar
    cornedbeef Posts: 152, Reputation: 4
    Junior Member
     
    #13

    Aug 22, 2008, 11:14 AM
    I have done as you said, typing 'cmd' then in the black window 'ipconfig/flushdns'. What is suppose to happen then?
    JBeaucaire's Avatar
    JBeaucaire Posts: 5,426, Reputation: 997
    Software Expert
     
    #14

    Aug 22, 2008, 11:46 AM
    Don't forget the space after ipconfig. You keep typing it (at least here on the forum) as a single word.

    ipconfig/flushdns = wrong
    ipconfig /flushdns = right

    RESULTS:
    Attached Images
     
    cornedbeef's Avatar
    cornedbeef Posts: 152, Reputation: 4
    Junior Member
     
    #15

    Aug 22, 2008, 01:28 PM
    See what you mean! I've done that and thought I'd cracked it and now when I press enter it says 'inconfig' not recognized as an internal or external command. Sorry I put inconfig not ipconfig as I should have. You wouldn't believe I'm not dyslexic would you?
    posvar8's Avatar
    posvar8 Posts: 1, Reputation: 1
    New Member
     
    #16

    Sep 13, 2012, 10:17 AM
    Hello!

    It all points to Adobe Flash... I had the same problem. Finally, I found that you need to uninstall the Adobe Flash you currently have now with the uninstaller you'll find on the Adobe webpage... then re-install an earlier version say the 10.3 instead of the 11.0 which seems to have a bug in the software... now my PC is finally running the way it should!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower has virtually no pressure [ 1 Answers ]

Hi- I hope someone can help, as my plumbing knowledge is not so hot. I have a relatively modern bathroom, but this morning it all seemed to go wrong. The shower (normally quite powerful), had no oomph. Then aftwer about a minute it gave up completely, with nothing coming out. I checked the...

Page linknot responding [ 2 Answers ]

When on the Web Site: IFILM, I click on an item to be played, there is no response :-[as it usually is. In stead I receive an error message that says PAGE ERROR. The details say something about Java Script. What is wrong? IFILM help was no Help. Charles


View more questions Search