I have a '94 Honda Civid 4 door Sedan.
The driver's side window has been broken out twice and replace twice.
However, now when I roll the window down it goes down crooked.
It will not go down straight and I fear it will fall out.
There must be something missing inside the door panel.
Can anyone help me?
-Thanks

txgreasemonkey

1. Remove:
. Door panel
. Plastic cover

2. Carefully move the glass until you can see the glass mounting bolts, then loosen them. Slide the guide to the rear, then remove the glass. Carefully pull the glass out through the window slot.

3. Peel the glass run channel out of the center channel.

4. Remove the mounting bolt, then remove the center channel.

5. Remove the two mounting bolts, two roller guide bolts and loosen the two mounting bolts. Remove the regulator through the center hole in the door.

6. Grease all the sliding surfaces of the regulator. Check that the regulator moves smoothly by connecting the regulator handle.

Note: Take care not to drop the glass inside the door.