Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Starter doesn't disengage from flywheel
[ 0 Answers ]
When I try to start my mower which is a 17 HP Murray, model # 425007x92B with a Briggs Stratton engine the starter engages the flywheel and starts to spin the flywheel but then stops and won't disengage from the flywheel. I had a battery charger connected to the battery so I'm pretty sure there is...
Noma snowblower 8hp electric starter works but will not turn the flywheel
[ 5 Answers ]
I have a noma 8hp snowblower... I replaced the starter today because I thought the old one didn't work anymore. I put the new one in and it did the same thing as the old one. I plug it in and press the button and the starter turns but it sounds like its grinding... there's only one place the...
Lawn Tractor starter spins but won't engage flywheel
[ 6 Answers ]
I installed a new starter on my old Simplicity Lawn 4108 Tractor. The starter was spinning but not engaging the flywheel. The new one does the same thing. I saw a small box bolted onto the engine (enclosed, about 1.5" by 1.5" by about an inch deep) with 2 wires coming out of it and joining the...
Craftsman tractor starter repair - flywheel removal
[ 1 Answers ]
I have a Sears Craftsman lawn tractor with a 19.5 HP Briggs & Stratton engine. The plastic toothed wheel on the starter that engages the flywheel is completely stripped. I have a repair kit but am having trouble removing the starter. Can I safely remove the flywheel instead. I can see that if I...
Flywheel won't turn
[ 27 Answers ]
Ok, Yardman is several years old (I believe about about ten years or so) but I have had it a few months. Worked fine for awhile. Last few times I would cut it would cut for a good while then it would just cut off. Battery is weak so I would always have to jump it off beforehand. No problem with... View more questions Search
|