Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Cars & Trucks   »   TORN CV Boot

 
Thread Tools Display Modes
Question
 
 
#1  
Old Nov 30, 2006, 09:10 PM
MVP2323
New Member
MVP2323 is offline
 
Join Date: Nov 2006
Posts: 1
MVP2323 See this member's comment history on his/her Profile page.
TORN CV Boot

I took my car to a mechanic and was recently told that I have a signicantly torn CV boot that requires an complete axle replacement. I am strapped for cash until June and am wondering "what is the worst that could happen" if I replace the axle later vs. now. I would appreciate any honest feedback. Thanks.

Reply With Quote
 
     

Answers
 
 
Old Nov 30, 2006, 10:18 PM   #2  
New Member
bodinejcs is offline
 
Join Date: Nov 2006
Posts: 5
bodinejcs See this member's comment history on his/her Profile page.
Hello ,

I would recommend fixing it , though I have driven cars with this problem for up to a year . Worse case , it will break and cause a lock up of the wheel which could cause a accident . the axle boot is filled with grease and when the boot rips , the grease flys out and the joint is exposed to the elements . It will stay quiet for a while and then will start to make a clicking noise especially when turning . It will get worse and worse over time and eventually break . I would recommend fixing it , but I have seen and fixed cars that have went long periods of time with this problem , so its hard to tell how long they will go . If your tight on cash , you could let it go for awhile but be easy on it , especially when you are turning . Hope this helps you !!!
  Reply With Quote
 
     
 
 
Old Dec 1, 2006, 05:47 AM   #3  
Cars & Trucks Expert
txgreasemonkey is offline
 
txgreasemonkey's Avatar
 
Join Date: Jun 2006
Location: Undisclosed, Republic of Texas
Posts: 4,885
txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.
If you fix it now, you can probably save your axle and CV joint, by repacking with CV grease and installing a new boot; otherwise, you get a remanufactured axle. By letting it go you also run the risk of getting the grease flung all over your disc brake pads--you know what that means. Fixing what you have will cost around $150 for replacing the inside and outside boot. You could probably save some money by only replacing the outside boot.
  Reply With Quote
 
     


Thread Tools
Display Modes

 
Similar Sponsors

Similar Threads
Question Asker Forum Answers Last Post
Torn between love Gravity Psychics 1 Nov 20, 2006 03:20 PM
torn over journal 006girl Relationships 17 Jun 28, 2006 11:45 AM
So torn. Can anyone relate? glow Relationships 2 Apr 11, 2006 10:45 AM
Torn about my ex-gf roxmyworld Relationships 7 Feb 16, 2006 04:15 PM
can't see my p.c boot up tommy dmc Windows 8 Dec 6, 2005 01:23 PM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 12:49 AM.