| Starter Motor Replacement
On most 4-cylinder Civics and Accords, the starter motor is located on the passenger's side of the transmission, just beneath and to the rear of the distributor. The large starter motor cable, from the positive battery terminal, goes right to it.
1. Disconnect the negative battery cable.
2. Disconnect the starter cable from the "B" terminal on the solenoid, then the BLK/WHT wire from the "S" terminal.
3. Remove the two bolts (14 mm) holding the starter; then, remove the starter. A 3/8-inch drive ratchet wrench or breaker bar, with a 6-inch extension, usually does the trick. Spray both bolts with PB Blaster, Kroil, or Liquid Wrench first.
4. Install in the reverse order of removal.
NOTE: When installing the starter cable, ensure the crimped side of the ring terminal is facing out. It's a good idea to clean both terminals and connectors with #240 abrasive cloth, or steel wool, and coat with dielectric grease. | 
Linear Mode
