Search:
Type: Posts; User: mjr0112
Search:
Search took 0.00 seconds.
-
Recheck all you bulbs again, it could even be coming on because of a license plate bulb. Recheck the front as well, don't forget the chmsl bulb(3rd), the vehicle needs to see a certain resistance,...
-
Take it in, cam sensors are very common problem in 2.7. If your sensor goes out completely, it can lead to a no start condition and leave you stranded somewhere. If you have a max care, a cam sensor...
-
If you follow the upper radiator hose you will find it. It sits between the A/c compressor and the alt. in the intake mainfold. There is two 13mm bolts you have to take out, if you don't take the...
-
Not properly bleeding the air out of the system can cause any motor to overheat/ run hot, bleed it with the engine cold,and not running it's a 8mm allen. Fill it up until it comes out the bleeder...
-
Just a little update, after doing a little research, I looked into self leveling underlayments. I went to a local masonary supply company, they had a product called Super flowcrete, it met all my...
-
I really don't want to remove more concrete, I would much rather add concrete to bring floor level. I would need to take 1 1/2" out of the center. I just got done taking up some concrete to install...
-
97 cherokee's with 4.0 don't have a by-pass hoses. It's probably the water pump, most common problem with 4.0L leaking massive amounts of coolant. The radiators will leak now and again, same for the...
-
It's hard to say without knowing what motor you have in your van, so all I can tell you is what leaks on those vehicles. Assuming you have a 3.3l or 3.8l, common oil leaks from the location you are...
-
I am currently fishing my basement. I just started last week, I am installing a bathroom, I just got done breaking up the concrete and installing the infloor pluming and reconcreting. My question...
|