Ask Experts Questions for FREE Help !
Ask
    DangerRanger92's Avatar
    DangerRanger92 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Aug 19, 2012, 07:00 PM
    Ranger won't start
    92 ranger 3.0 won't start. Take gas on a rag will start. Fuel pump runs all the time when key is turned on. Idles good,give it gas it acts like flooding out. Replaced plugs wires distributor cap rotary button 3 relays under fuse box plugs fuel filter new fuel pump various sensors still no start unless I gas a rag.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 20, 2012, 05:45 AM
    Replace the Ignition Control Module (ICM).
    DangerRanger92's Avatar
    DangerRanger92 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Aug 26, 2012, 02:45 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    Replace the Ignition Control Module (ICM).
    Changed ignition control module and put new distributor starts and runs it did solve the fuel pump running all the time for a bit but now fuel pump back to running all the time. Thinking bad ground
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Aug 27, 2012, 09:29 AM
    Fuel pump grounding is often through the ECM. Try cleaning the main ECM ground; otherwise, it may be a bad ECM.
    DangerRanger92's Avatar
    DangerRanger92 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Sep 2, 2012, 04:43 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    Fuel pump grounding is often through the ECM. Try cleaning the main ECM ground; otherwise, it may be a bad ECM.
    t
    Tx
    DangerRanger92's Avatar
    DangerRanger92 Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Sep 2, 2012, 04:46 PM
    Quote Originally Posted by DangerRanger92 View Post
    t
    Tx
    TxGreaseMonkey thanks for all you advice on the 92 Ranger. It is running great. No hesitation anymore. Thanks again
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Won't start-deck engage switch is causing it to start or not start [ 0 Answers ]

I must engage deck plunger several times to get the tractor to start sometimes it never starts 1 year old-aprill 2011

74 chevy truck will turn over but won't start. Will start with starter fluid but won't [ 1 Answers ]

My 74 chevy pickup sat over the winter and now it won't start. I was running just fine before I let it sit. It turns over but won't start. If I use starter fluid, it will start but won't stay running. I don't smell gas in the carb either. I'm thinking it's the fuel pump or the filter. Problem...

94 Ranger 2.3 Won't start [ 3 Answers ]

My 94 2.3 will not start. Coils changed,plugs changed... no check engine light on. Been running rough here and there, sometimes worse than others. Sometimes I would have to hold the key till it started so I just changed the crank position sensor and it cranks better but will not start

my john deere z 425 won't start, it turns over but won't start [ 0 Answers ]

my john deere z 425 won't start, it turns over but won't start. I keep turning it over but it never cranks. It only has 150 hours on it

92 ranger won't start [ 2 Answers ]

I have a 92 ford ranger with a 4 cylinder Distributorless ignition. It has gotten to where it just cranks and doesn't fire. Changed plugs and wires and still nothing. Any easy way to check the coil packs to see if they are bad? Or what else could it be?

View more questions Search