I have a chilton manual and it tells me to remove the four springs on the back of the steering wheel. I have two torx screws holding the steering wheel rear cover on. Do not see four springs as per manual. Can you help
Check out some similar questions!
1999 Chevy Tahoe Steering Issues [ 5 Answers ]
When I am driving along a curvy road whether it be a slight curve or major curve, which ever direction I have the steering wheel, it will suddenly pull/jerk to that side as if someone is grabbing and pulling it. So if I am curving to the left, the steering will jerk to the right. Any ideas what...
Chevy Tahoe 1999 A/C works off and on [ 2 Answers ]
My A/C kicks on after about an hour driving. If I'm lucky, sometimes it will kick on before that. Sometimes it works right away. Some days it doesn't work at all. Oh let me clarify... it blows air just fine, just hot air, and then finally the cold air comes through. My heat works just fine. ...
I want to know how to remove the steering wheel of chevy blazer [ 1 Answers ]
I'm replacing the beam switch on the steering wheel ,the steering needs to be removed in order to do that, please tell me how can I remove it? Thank you
Chevy Blazer steering wheel removal [ 1 Answers ]
I would like to know how to remove the factory steering wheel with air bag. For the installation of an aftermarket wheel. Without airbag.
1954 chevy steering wheel and horn [ 1 Answers ]
Am trying to figure out the correct way to assemble the steering wheel and horn ring section on a 1954 chevy. I have a large steel (looks like a washer) and a clear plastic ring. Do these go in behind the steering wheel or under the orn ring between the horn ring and wheel? Can't find the answer...
View more questions Search
Add your answer here.