<img src="http://www.askmehelpdesk.com/images/smilies/confused.gif" alt="" title="Confused" smilieid="10" class="inlineimg" border="0"> We have changed the clutch master cylinder. It seems like we cant get all the air out of the lines. I have even went as far as getting a bleeder kit.The first time I had a full clutch on top and all of a sudden the peddle went to the floor. It would not come up. while later I was able to pull it up and had a clutch on top. We changed the master and the slave cylinder bleed the system to no luck.I had no clutch. Found the bushing was not tight, tightened it and was able to bleed it.Came back about 3 hours later to drive it home. The clutch was back on the floor .Like it was full of air again. Does anyone know what I am doing wrong? <img src="http://www.askmehelpdesk.com/images/smilies/eek.gif" alt="" title="EEK!" smilieid="9" class="inlineimg" border="0"> <img src="> <img src=" alt="" alt="Confused" title="10" smilieid="inlineimg" class="0">