At Ask Me Help Desk you can ask questions in any topic and have them
answered for free by our experts. To ask questions or participate in
answering them you must register for a free account. By registering you
will be able to:
Get free answers from experts in any of our 300+
topics.
I have an Airguide compass for my car but have lost the instructions. How do you set it up. It is the basic model with suction cups and a round globe on a square base
Don't know if this will help but it is worth a try. I had a Laser that when it needed calibration you needed to turn the wheel all the way to the right and do 4 complete circles. This calibrated it.
* ADJUSTING THE COMPASS
DO NOT USE STEEL SCREWDRIVER (THIS WILL AFFECT THE COMPASS MAGNETS) USE A DIME TO TURN REGULATOR SCREWS
* 1. Head North. Turn the regulator marked NS, very slowly, until the dial reads either N or S.
* 2. Head East. Turn the regulator marked EW, slowly, until the dial reads E.
* 3. Head South. If the compass does not read exactly on "S" -- Then turn the NS regulator just enough to remove only one-half of error.
* 4. Head West. Turn EW regulator just enough to remove only one-half of the error. Follow the same procedure as in step 3.
Linear Mode
