Ask Experts Questions for FREE Help !
Ask
    littlebrigg's Avatar
    littlebrigg Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 6, 2008, 01:45 PM
    Briggs & Stratton Starter
    My starter gear was shredded so we took the starter off and replaced the gear and put the starter back in. But when we hooked everything back up it doesn't even try to turn over. Now when we touch the starter relay to the starter it makes a clicking noise but that's it PLEASE HELP
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jan 6, 2008, 05:52 PM
    . Clean battery cables and terminals.

    . Charge or replace the battery.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I can't pull the starter cord on my 10hp Briggs and Stratton Engine [ 6 Answers ]

I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...

18hp Briggs Starter Squeals [ 3 Answers ]

I have an older montgomery wards mower and the starter makes a loud squealing noise and does not turn the flywheel.I have sprayed 10w40 around the starter and also tried filing the plastic gear thinking it might be a problem as it showed some wear.This just started occurring and I was wondering is...

15 HP briggs starter issues [ 1 Answers ]

I have a 15 hp briggs motor on a craftsman mower. I got it from a friend, free... I found out why... The starter wasn't working, so I replaced it, the carb was junk, so I replaced it. The battery wouldn't take a charge so I replaced it... 225 bucks into it so far, and now it won't even try to...

Briggs and stratton [ 6 Answers ]

My briggs and stratton lawnmower was running great then started spluttering. Cleaned air filter changed spark plug still the same. Spark plug goes a sootie black colour in 30 secs. Also its pulsing badly with a bit of black smoke. Any help welcome ...

Starter Rewind repair Briggs and Stratton [ 2 Answers ]

I have a Briggs and Stratton 3.75 Spirit motor Model 98902 Type 0131 with a broken recoil spring. I can rewind the cord by hand and still start the motor. However after a year and a half of that I figure it's time to fix this! I am mechanically sound but wanted to know if there is anything I...


View more questions Search