Are you hearing the noise from the brake pad sensors, indicating the pads need replacing?
If you need to replace the pads, which is most likely:
. Use ACDelco OEM pads.
. Apply Squeak Relief or suitable anti-squeal compound to shims.
. Lubricate caliper pins with silicone grease or Squeak Relief.
. Examine discs. Don't allow discs to be automatically turned on a lathe, which can result in lateral runout (LRO) problems. It's best to use a ProCut machine, which virtually eliminates LRO, if the discs truly need turning.
. Change brake fluid, with an ABS-approved product:
http://www.askmehelpdesk.com/cars-tr...tml#post619000