Ask Experts Questions for FREE Help !
Ask
    porkchop112007's Avatar
    porkchop112007 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 7, 2010, 08:36 AM
    Brakes
    I have a 1989 GMC full-size Jimmy. I am needing the steel brake lines from the master cylinder to the junction box. Can I use the lines off a full-size truck?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Feb 7, 2010, 02:03 PM

    It should work; otherwise, buy additional brake pipe and a double flaring tool and make your own.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #3

    Feb 8, 2010, 03:50 PM

    Correct advise.
    Use the proper flare tool and save a lot of money.
    Also, be patient when bending brake piping: you cannot use it if it kinks.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Corvette brakes [ 1 Answers ]

Hi folks. Son has a 77 Vette that has lost brake pressure. Master cyl. Is full and I've found no leaks anywhere. Soon as we start the engine the pedal goes right to the floor.My first guess is the vacuum booster. He's recovering from a foot injury in Quantico right now but will be able to drive...

Brakes 2005 Honda Accord brakes? [ 3 Answers ]

How hard are the brakes pads on a 2005 honda Accord to change?

Clicking in Brakes [ 2 Answers ]

I recently put new brake pads on my 99 Durango, when I press the brakes, I notice a clicking noise in the right side. Can anyone help diagnose the problem? Thank you

Brakes [ 2 Answers ]

I have a 1999 dodge intrepid es 78,000 miles abs brakes with traction control I 'am have problems with front brakes draging real bad and brake pedal getting real hard only in stop and go traffic

Brakes [ 1 Answers ]

91 honda accord exr the problem i am having is with my brakes. Sometimes the brakes drag but i have check the sliders and they are okay. Also sometimes when u turn or even going straight u hear a funny noise. Like 2 pieces of metal touching for a second. Any idea?


View more questions Search