Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Cars & Trucks   »   ecm error light code

 
Thread Tools Display Modes
Question
 
 
#1  
Old Feb 10, 2007, 06:57 PM
alien1
New Member
alien1 is offline
 
Join Date: Feb 2007
Posts: 1
alien1 See this member's comment history on his/her Profile page.
ecm error light code

i've got a 91 honda civic hatchback dx. so here is my problem....the car runs and revs up perfectly fine when it's cold but as soon as it warms up and ypu try too rev it up it bogs out as if it's getting too much air or too much fuel. the ecm light blinks 16 times constant them stops then continues to blink another 16 times and continues to do the same. i dont have a way to read the ecm code so if some one could tell me what the light code means i would apreciate it! I'm pritty sure it's the air flow sensor or what ever the hell it's called located on the intake manifold but i don't want to change out something that dosn't need to be changed!! confused:

Reply With Quote
 
     

Answers
 
 
Old Feb 10, 2007, 07:08 PM   #2  
Cars & Trucks Expert
txgreasemonkey is offline
 
txgreasemonkey's Avatar
 
Join Date: Jun 2006
Location: Undisclosed, Republic of Texas
Posts: 5,088
txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.
Code 16--A problem in the fuel injector circuit.

Most likely it's the PGM-FI Main Relay that needs replacing. They are very problematic. Zillions of them have been replaced on this site.

Just to be safe, start your car and, using a mechanic's stethoscope, listen to each fuel injector to make sure they "click." If they do, focus on replacing the main relay. If an injector doesn't click, turn the ignition switch OFF, disconnect the 2P connector from the fuel injector that does not click, and measure resistance between the 2 terminals of the fuel injector. The resistance should be 10-13 ohms; if not, replace the injector.
  Reply With Quote
 
     


Thread Tools
Display Modes

 
Similar Sponsors

Similar Threads
Question Asker Forum Answers Last Post
Kenmore dishwasher error code? cworthy Appliances 0 Jan 24, 2007 07:23 PM
94 camry ECM code no.1 crank no start ganou Cars & Trucks 4 Dec 20, 2006 07:55 AM
printer error code Danny55 Printers 0 Dec 12, 2006 07:40 PM
po445 error code dabbyg1 Cars & Trucks 3 Oct 23, 2006 04:16 PM
error code Lu1875 with Norton samsr Antivirus 2 Jul 20, 2006 03:28 PM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 07:04 AM.