Ask Experts Questions for FREE Help !
Ask
    the4x4kid's Avatar
    the4x4kid Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 4, 2012, 08:26 PM
    2003 f250 6.0 problems
    I have an 03 f250 with the 6.0 and 160000 miles. Truck hasn't had any problems like this before. My wife ran it out of fuel and now she don't want to start. Sometimes she cranks right up but normally I crank it 3 or 4 times for about 15 seconds each. I pull a code which is P2285 injector control pressure sensor circuit low. Anyone have any possible solutions to get the truck running again? When she does start she runs rough but she won't shut herself off. I can run it for hours in the city or out on the highway no problem. Any suggestions would be greatly apprecieated

Check out some similar questions!

2003 ford f250 diesel problems? [ 5 Answers ]

2003 ford f250 diesel hard starting and lots of smoke after it starts. Also no power.

2003 f250 diesel [ 1 Answers ]

My 2003, 6.0 diesel, won't allow the A/C to blow air out of the dash vents. It only comes out of the defrost vent or the floor vents. I do have good vacuum and I replaced the selector switch.

2003 ford f250 diesel problems [ 0 Answers ]

Hi thank you for the membership, I'm working on a 2003 Ford f250 diesel 6.0 engine. Engine crankover but won't start, has fuel pressure all the way to the cylinder heads injectors, the signal for the injectors is not there, and it runs with starting fluid spray into the intake. Runs good till it...

What would be causing charging problems in a 2003 f250 6.0? [ 2 Answers ]

I have a 2003 F250 6.0 powerstroke diesel and I am now having charging problems. When it first starting having this problem I replaced the alternator. It fixed it for about 6mths. I have now started having problems again. I bought a brand new alternator and put it on the truck and the intrusment...

Ford 2003 f250 [ 0 Answers ]

My 2003 f250 will not start when the overdrive "off" light is on. When I turn the key on and off many times it will go off and the engine will start and run fine. Why is this and what can I do about it? Thanks for any help


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.