Ask Experts Questions for FREE Help !
Ask
    rdsrds2's Avatar
    rdsrds2 Posts: 4, Reputation: 1
    New Member
     
    #1

    Aug 24, 2010, 04:01 PM
    1994 toyota camry no spark
    Last week my 1994 toyota 4 cyl. Camry died while on the road. It was having intermitent stalling problem during idle before failing last week and I was driving it like a stick shift pushing it into neutral at lights. I figured I'll drive it like that until the problem gets so bad it fails all together. The mechanics I went to all came back with standard IAC, EGR, tune up, etc. and the engine diagnostics they used said EGR. They would fix the problem for $300+. But everything I read on the web says that is hardly ever the problem. Some mechanics said "NOT EGR".

    OK. So when it died last week there was no spark. Had car towed to my house and installed a rebuilt distributor. Car started right up. Was really happy about that. Then drove the car 1 mile and it died. Again, no spark. DAM! I now have a check light engine code of 21. That lists distributor and curcuitry, igniter and circuitry, starter, and ECM as possible problem areas. What to do now? ECM? Big bucks. Igniter? Big bucks. Is there anything I can do to further isolate the problem? Why did the spark return after replacing the distributor then go away. Has anyone experienced anything like this?

    Bob
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Aug 24, 2010, 05:14 PM

    Perform the tests in the link below:

    https://www.askmehelpdesk.com/cars-t...ml#post2123675

    If you replace any parts, start with the coil.
    rdsrds2's Avatar
    rdsrds2 Posts: 4, Reputation: 1
    New Member
     
    #3

    Aug 24, 2010, 05:21 PM
    I replaced the entire distributor which included a new coil.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #4

    Aug 24, 2010, 05:26 PM

    Rebuilt distributors are always suspect, especially on Hondas and Toyotas. You'll have fun isolating the problem, now. Over 50% of new aftermarket distributors for those vehicles don't work. The percentages for rebuilts are even worse. Only go OEM on Honda and Toyota distributors.
    rdsrds2's Avatar
    rdsrds2 Posts: 4, Reputation: 1
    New Member
     
    #5

    Aug 24, 2010, 05:38 PM
    You are right about that, I'm up the creek now. Where to go? I guess with 283K miles its time to let it go. But I just went through inspection with flying colors, emissions and all.

    Quote Originally Posted by TxGreaseMonkey View Post
    Rebuilt distributors are always suspect, especially on Hondas and Toyotas. You'll have fun isolating the problem, now. Over 50% of new aftermarket distributors for those vehicles don't work. The percentages for rebuilts are even worse. Only go OEM on Honda and Toyota distributors.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
     
    #6

    Aug 24, 2010, 06:02 PM

    I concur. Aftermarket dizzy's BIG thumbs down. You can keep returning it till you get a halfway decent one, or you could bite the bullet and buy an OEM dist housing (around 275) and a new coil (around 96) that'll get it right.
    It's your call.
    rdsrds2's Avatar
    rdsrds2 Posts: 4, Reputation: 1
    New Member
     
    #7

    Sep 2, 2010, 03:40 PM
    Boy both of you guys, TxGreaseMonkey and kitch428, have hit the nail on the head on the remanufactured distributors. That 94 Reman. Had a intermittent open on the rotator coil. Because of that it sailed through the factory bench test only to wind up in my car.

    Still, I am not ready to shell out the almost $400 for a OEM distributor. Ordered a aftermarket one from A-M Auto Parts for $118. It came all new and spiffy, with a new cap and rotor. The car started right up again. Now the question is, will it last for 31 days -- just out of warranty period--and fail. By the way this outfit A-M auto had the new distributor in my hands within 24 hours of my final keyboard enter stroke online. Impressive!
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #8

    Sep 2, 2010, 05:08 PM

    It likely will work, until you are in the middle of nowhere; then, it will fail on you.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1994 toyota camry no spark [ 5 Answers ]

I have a 1994 Toyota Camry with a 2.2L 4cyl. That was running like a top right up until it died last week. I have checked the fuel system. It appears that I am getting plenty of fuel. Checking the plugs shows that I am not getting any spark. I have checked the plugs, wires, cap, and rotor. All...

1994 toyota camry overheating when a/c on [ 0 Answers ]

I have a used 94 camry .for the first time I ran the a/c ancar started over heating an fluit can out of reisitvor.

1994 toyota camry warning lights [ 3 Answers ]

What does the little car with lines coming from the back of it mean?

1994 toyota camry 4 cylinder [ 1 Answers ]

How to bypass a/c compressor to altenator on 1994 toyota camry 4 cylinder

What are possible causes for overheating 1994 Toyota Camry V6 [ 4 Answers ]

Hi, My Camry started to overheat a few days ago when sitting in traffic or moving at low speeds and as well there is a loud 'whirring' sound (like an old Jeep) coming from the engine when it gets hot. Travelling at highway speeds it appears fine and doesn't overheat. Coolant had been low...


View more questions Search