Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Cars & Trucks   »   1993 Honda Civic - stumbles under load

 
Question Tools Search this Question Display Modes
Question
 
 
#1  
Old Aug 14, 2007, 07:40 PM
gjb149
New Member
gjb149 is offline
 
Join Date: Aug 2007
Posts: 2
gjb149 See this member's comment history on his/her Profile page.
1993 Honda Civic - stumbles under load

I have a 1993 Civic 5 speed with a D15B7 (NON v-tec) motor with 95,000 miles on it
The car is operated in a relatively cool area (Vancouver, B.C.)
Under load (pedal to the metal) is stumbles until 4000 RPM and then is smooth as silk
(I notice it more in the lower gears)
The car has NEVER not started, never stalled, nor ever let me down
It idles perfectly (both hot and cold)

This is what I have done to the car (so far)...
new plugs and plug wires (NGK)
Distributor cap and rotor
checked timing (but did not adjust it)
re-soldered the Main Relay (one of the smaller solder connections WAS cracked)
gas filter
air filter
I have used fuel injector cleaner a few times in the past month or two

I have not checked NOR replaced the PCV valve, the TPS, MAP sensor, nor ECU

To be honest, it isn't getting any worse and I could live with it as it is

I would genuinely appreciate any suggestions 'you' may have.

Thanks.
Gordon

Reply With Quote
 
     

Answers
 
 
Old Aug 15, 2007, 01:10 AM   #2  
stilllearning
Junior Member
stilllearning is offline
 
Join Date: Jul 2007
Posts: 56
stilllearning See this member's comment history on his/her Profile page.
Really make sure that the plug wires are seated on the plugs, this has happend to me a couple times on civics.
  Reply With Quote
 
     
 
 
Old Aug 15, 2007, 06:48 AM   #3  
txgreasemonkey
Cars & Trucks Expert
txgreasemonkey is online now
 
txgreasemonkey's Avatar
 
Join Date: Jun 2006
Location: Undisclosed, Republic of Texas
Posts: 4,494
txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.txgreasemonkey See this member's comment history on his/her Profile page.
Here's what I would do:

. Replace the Ignition Control Module and coil:

http://www.askmehelpdesk.com/cars-tr...tml#post265896

. Clean Idle Air Control Valve and throttle body.
. Check vacuum hoses, particularly to MAP Sensor.
. Perform K-Test on ECM.
  Reply With Quote
 
     
 
 
Old Aug 15, 2007, 03:29 PM   #4  
gjb149
New Member
gjb149 is offline
 
Join Date: Aug 2007
Posts: 2
gjb149 See this member's comment history on his/her Profile page.
TXGREASEMONKEY I was hoping you might post a response. You seem to know lots about Honda Civics. So, THANKS.

I have a KNOWN good distributor for my car which I will swap into the car (maybe tonight - depending when I get off work). I'll let you know.
Gordon
  Reply With Quote
 
     
 
 
Old Nov 27, 2007, 02:57 PM   #5  
miala
New Member
miala is offline
 
Join Date: Nov 2007
Posts: 5
miala See this member's comment history on his/her Profile page.
Quote:
Originally Posted by gjb149
I have a 1993 Civic 5 speed with a D15B7 (NON v-tec) motor with 95,000 miles on it
The car is operated in a relatively cool area (Vancouver, B.C.)
Under load (pedal to the metal) is stumbles until 4000 RPM and then is smooth as silk
(I notice it more in the lower gears)
The car has NEVER not started, never stalled, nor ever let me down
It idles perfectly (both hot and cold)

This is what I have done to the car (so far)...
new plugs and plug wires (NGK)
Distributor cap and rotor
checked timing (but did not adjust it)
re-soldered the Main Relay (one of the smaller solder connections WAS cracked)
gas filter
air filter
I have used fuel injector cleaner a few times in the past month or two

I have not checked NOR replaced the PCV valve, the TPS, MAP sensor, nor ECU

To be honest, it isn't getting any worse and I could live with it as it is

I would genuinely appreciate any suggestions 'you' may have.

Thanks.
Gordon
I am wondering if you ever figured this problem out? I have a 90 hatch that is pretty much doing the same things you have described. Your explaination is worded so much better than I have been able to do here . Any feedback would be greatly appreciated
  Reply With Quote
 
     


Question Tools Search this Question
Search this Question:

Advanced Search
Display Modes

 
Similar Sponsors

Similar Questions
Question Asker Topic Answers Last Post
1993 honda civic has a ground,cant find where conrabbit65 Cars & Trucks 1 Jul 6, 2007 06:37 AM
1993 Honda Civic down2earth411 Cars & Trucks 1 Jun 27, 2007 07:29 AM
1993 honda civic headlight switch msbeehavens Cars & Trucks 1 Jun 26, 2007 05:54 AM
ECU input to Igniter (ICM) on 1993 Honda Civic DPFI amer_uk Cars & Trucks 0 Jul 5, 2006 07:45 AM
1993 Honda Civic Alarm Shutdown ALKMIK Cars & Trucks 1 Apr 1, 2006 01:28 PM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 04:40 PM.

Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.