Ask Experts Questions for FREE Help !
Ask
    havenoclue's Avatar
    havenoclue Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2008, 08:26 PM
    1991 honda civic. Fan or vent will not work after replacing ignition switch
    I have this 91 honda hatchback. The engine will die as soon as you let go of the key. So I replaced the ignition switch. Now, the car is running but the hot or cool air will not come on. The cooling fan sounds like its louder then before once its on. Everything else seems OK on the inside again. The lights in the dashboard are all back on after replacing the ignition switch, except for the hot or cool air. Please help.
    rufaro's Avatar
    rufaro Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Jan 27, 2008, 09:12 PM
    If its just the noise and the cold or hot air is coming out. I had the same problem the fan was loud and I had to change the fan bearings. Its cheap you can do it yourself.
    havenoclue's Avatar
    havenoclue Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 28, 2008, 02:45 PM
    No, neither the cold or hot air is coming out. So, I am wondering if it has anything to do with the new ignition switch I just install. Is this control by the ignition switch?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1991 honda accord ignition switch [ 8 Answers ]

My ignition failed to turn anymore which proved to be the key lock going bad tried replacing with a new one from schucks but every time we do as it states you can only turn the key from positions 1-3 and not to the off position to remove the key. According to the instructions you put the lock in...

1991 Honda Civic Ignition [ 7 Answers ]

I am referring to an article posted by CroCivic in May 2005, which details testing the Honda ignition system. In the section on how to diagnose the Igniter Unit, I do not have continuity between the BLU wire and ground. The WHT wire measures 198k ohms. The article states to check for an open in...

Honda Civic 1991 Ignition [ 1 Answers ]

I have a honda civic 1991 and someone broke in to it and put a screw driver into the ignition and now the key won't turn in the ignition and I was wondering about changing it myself. Is it a hard thing to do and how much would it caust for a used ignition. Apreciate the help.:D

91 Honda Civic Ignition Switch [ 3 Answers ]

I need instructions for replacing a 91 Honda Civic ignition "lock" switch. I have to replace the whole unti not just the tumblers. Thanks.

View more questions Search