I Have A 1990 Civic That Will Not Start. The Last Time That I Drove The Car It Was Fine. It Has Always Run Fine No Problems.
I Have Changed Out The Igniter Unit And Replaced The Rotor Cap And The Distributor Cap. It Will Turn Over But It Does Not Seem To Fire Off. I Checked The Spark And There Seems To Be A Spark, Not Sure If It Is Enough. I Have Checked The Timing And With The Crank On Tdc The Cam Pulley Marks Are Parallel With The Cylinder Head (with The “up” Mark On Top) And The Rotor Is Pointing At The #1 Spark Plug Wire.

maggiemcmillian

I Had Another Question About A Problems With The Ignition Switch On The 1990 Honda Civic. I Need To Replace The Key Switch Assembly On This Civic. It Is Hard To Turn Off And On. Sometimes It Gets Stuck Either Off Or On. Have You Any Information About How To Change The Switch?

txgreasemonkey

Here's how to change the steering lock assembly:

http://www.askmehelpdesk.com/cars-tr...tml#post224842

maggiemcmillian

Is There A Way Of Changing Just The Key Cylinder On A 1990 Honda Civic, Rather Than Changing The Whole Lock Assembly?
Steve