Ask Experts Questions for FREE Help !
Ask
    olsonkm's Avatar
    olsonkm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2007, 06:37 AM
    Whirlpool Gold Senseon Dryer
    After aprox 5 minutes of operation, our dryer shuts off and displays an error code of "E1". You then have to reset and restart. The error code may or may not come back. It can take as long as 2 hrs to dry an average size load of laundry. L What is the fix for this annoying problem?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 17, 2007, 07:36 AM
    I believe it means the thermister circuit is open. When it shuts down, Unplug unit from power, remove 1 wire from thermister and check the thermisters for continuity. If you have none, replace thermister and problem corrected. Good Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Gold Senseon Won't tumble or heat [ 3 Answers ]

Just bought a whirlpool dryer used, it's a whirlpool gold senson model. The dryer powers up and the digital display shows time and such... the timer even counts down, but... I am not getting any heat and the drum won't tumble. I am new to electric dryers but am quite handy. If someone could please...

Whirlpool Gold Senseon dryer won't run. [ 1 Answers ]

I have a Whirlpool Gold Senseon dryer Model: GEX9868JQ0 which just quit working. Until today never gave me any problems. When I select the cycle and press "Start" I hear the relay clicking, but won't start and the "Drying Status" red indicator light "Sensing" is flashing rapidly. I have tested the...

Whirlpool Senseon dryer will not start [ 6 Answers ]

I have a Whirlpool Senseon dryer that will not start. None of the led's on the front panel will light up to give me any control over the unit. I have 240vac connected and present at the terminals. I have read through the troubleshooting guide that came with it and after performing a few tests, it...

Whirlpool Senseon dryer will not work. [ 2 Answers ]

I still have not fixed my Whirlpool senseon dryer. I cannot seem to find the problem. The keypad will not light up at all or respond to any action. I took the cover off and I cannot seem to get the 5vdc needed from he electronic board to the keypad. I replaced the electronic assembly (twice) with...

Whirlpool Senseon Dryer [ 1 Answers ]

Purshased a home with a Whirlpool Senseon dryer model # GGW9868KQ1. I have a problem every time we put in a load, we select the settings and press start. Dryer starts, but after a minute the machine stops and displays E1 on timer. We restart and does it again, we have to constantly keep drysitting...

View more questions Search