 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool cabrio washer odor
I purchased a Whirlpool Cabrio Washer about 4 months ago. Our clothes and towels come out of the dryer with a bad odor. I have ran the washer through the washer cleaning cycle two times. Once with the sample cleaning tablet that came with the washer, and once with the Tide brand washer cleaner. The clothes still smell musty. I know these washers are water savers but during the wash cycle the water does not even cover the clothes. Should the water level at least cover the clothes? :confused:
|
||||
|
|
|
||||
|
Whirlpool used technology from foreign manufacturers (fischer-paykel) when they developed the Cabrio. It's an excellent HE washer. The water does not cover the clothing. The musty smell in towels and clothing is being transferred from the washer. Smelly Washer Cleaner is guaranteed to remove odor from them all but the washer must be cleaned first. After the odor is gone washing habits must be changed. Advice on what should be changed can be found on our featured post on the blog page at smellywasher.com /
Paul Flynn/ Smelly Washer Inc. |
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
Ive had Whirlpool Cabrio Dryer going on 4 yrs on christmas, The question I have is I turn my dryer on it lightin up and taking minutes like its working but its not doing anything, any idea what is wrong?
The cycles run fine until the last 5 minutes of each cycle where the timer seems to get stuck and the dryer continues to run until someone physically stops it. I realize the Cabrio comes with the wrinkleshield which is supposed to keep spinning the drum after the clothes are dry, but is that what...
I have a Whirlpool Cabrio Dryer. It is approx. 3 yrs old. I have noticed that when I put clothes in to dry and hit start it has the digital time displayed for a minute or so then a message appears saying AF and it starts flashing. I have to hit the clear button and it goes back to the...
I have a Whirlpool Cabrio that is less than a year old. When we try to run a load & press start, the sensing light comes on & nothing else happens... what gives?. any ideas?
View more questions Search
|
