Ask Experts Questions for FREE Help !
Ask
    Telluride's Avatar
    Telluride Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2010, 03:00 PM
    What to do about garage door stuck open?
    I installed a new circuit board in my Stanley Pro Series Garage Door Opener. All went well, except that I forgot to reengage the [trolley? Traveller? Whatever it's called] to the door after having pulled the red emergency cord, I before I taught the UP position.
    So when I taught it "up," I think I went too far, since I didn't know when to stop (because the door isn't attached to it so it was just the chain moving).
    When I try to reverse it, or teach it "down," the chain just lurches and stops, without reversing.
    Clearly I need to get the part on the chain that hooks to the door, moved back towards the door, but right now it's hidden directly above the opener itself.
    Any suggestions how to do this?
    Thank you kindly.
    kryostar's Avatar
    kryostar Posts: 108, Reputation: 11
    Junior Member
    		  
    #2

    Aug 8, 2010, 12:22 PM

    another way to go would be to take the master link out of chain and move chain to a position where you can lock in trolley.the trolley might be jammed up from going to far.hope this helps please rate my answer thanks
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Remote doesn't open garage door. [ 11 Answers ]

Remote doesn't open garage door. If I press the button within the garage, it will open or close the door. The battery in the remote is new. The built in car opener doesn't work either. At one point, door would open with the remote for several days and then it wouldn't. This happened on two...

Light on Craftsman Garage Door Open will not turn OFF, when Open. [ 8 Answers ]

I purchase a new Craftsmang ½ hp Garage Door Open and found out in the Problem Section that if I have the door open and cross the safety sensor beams the light will turn ON automaticlly. I hate this feature because my kids constatnly run in and out of the garage door when it is open, so the light...

Garage door open by itself [ 11 Answers ]

Dear expert: Recently my garage door has some problem. Sometimes after I pressed the remote to close the garage door, it opened again by itself. I tried to buy another new remote control, but it happened again. But this would not happen if I used the wall-mount unit. Does anyone have any idea...

Garage Door Won't Open [ 1 Answers ]

Help! I'm locked out of my garage. My remote is in my car inside the garage, and my code will not work on the keypad. It was working yesterday but it just stopped today. I have changed the battery, and tried resetting a temporary password. These things do not wok. It is a Craftsman model...

Garage Door won't open fully [ 2 Answers ]

I have a lift master garage door opener. It works fine on the downward trip but on the upward trip the door stops approx 1 foot off the ground. I can put my finger under the door and lift it while it is in motion and it will complete the upward trip without interuption. Little pressure is being...

View more questions Search