Ask Experts Questions for FREE Help !
Ask
    WhiteyWhite's Avatar
    WhiteyWhite Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2009, 12:39 PM
    String around washing machine agitator
    I have a drawstring wrapped around my GE washer agitator. How do I access this to fix it?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Aug 22, 2009, 12:44 PM

    You may have to bite the bullet and take a knife or pair of scissors and cut the string. Or you can run some water in the tub and try to work the string to where you can find an end and gently start unwrapping it from around the agitator.
    WhiteyWhite's Avatar
    WhiteyWhite Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 22, 2009, 04:12 PM
    Yeah, I cut the string. I was hoping to be able to unwind it completely, but as long as it doesn't interfere with the operation of the washer, I guess it will be all right. Thanks for the prompt response.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing machine agitator [ 5 Answers ]

My Whirlpool washing machine has stopped agitating. The motor sounds good, but the solenoid is not pulling up the magnetic arms. I've ohm'd the solenoid, and both are about 700. (I've heard they should be between 250 and 1000) so I'm assuming its OK. I've replaced the timer... no luck. Any...

Washing machine agitator removal [ 1 Answers ]

I have a Maytag top loading, heavy duty machine. I need to retrieve something under the agitator. It is ten years old. How do I get the agitator off... Thanks.;) >Moved from Forum Help<

Washing machine agitator runs constantly [ 1 Answers ]

I have a Kenmore Elite washer. Lately, the agitator will run immediately when the washer is started.

View more questions Search