Ask Experts Questions for FREE Help !
Ask
    Filbert's Avatar
    Filbert Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2007, 02:55 PM
    Hotpoint Range
    I have a Hotpoint (GE) range that needs a new baking element. The model number is RB787W0Y2WW. Can anyone tell me if I will have to remove the back of the range in order to replace the element?
    Guest's Avatar
    Guest Posts: n/a, Reputation:
    Guest
    		  
    #2

    Apr 2, 2008, 08:30 PM
    UNPLUG THE STOVE there could still be power to one side of the element. You should be able to remove screws holding element and pull gently through the wires should come through too. If they accidentally come off then you will have to take the back of the stove off. The key word is GENTLY. Hope this helps. Bo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hotpoint dryer overheating [ 4 Answers ]

I got this dryer disassembled from a guy who tried to fix it, said it shut off. I got it all back together and it runs good but gets way too hot. I checked for air blockage, airflow SEEMS fine, I do have a 90 degree bend in the exhaust tube, but don't think it's enough to cause the...

Indicator lights on Hotpoint Range [ 1 Answers ]

Hi, We picked up a used Hotpoint range the other day. After plugging it in we tested the oven and the burners. Everything seems to be working fine except for the indicator lights. When the oven dial is set to OFF, the oven indicator light turns on. When the dial is set to anything else (BAKE,...

View more questions Search