Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I wire up my new AC condenser fan motor?
[ 7 Answers ]
My new AC condenser fan motor has an extra wire. What do I do with it? AC is a 1996 SEER 12 Rheem. New motor is an A.O. Smith 1/8 HP 208 RPM 208-230 volt. Old motor has 3 wires, black, brown, and orange. New motor has 4. Black, brown, orange, and brown with a white stripe. Does anybody...
How to connect electrical wires of new condenser motor (Emerson)
[ 3 Answers ]
I'm installing a new Emerson condenser fan motor and capacitor. The wire colors are Black, White, Brown, Striped Brown. I understand that Black goes to electric panel, Brown and Striped Brown to capacitor. Where does the White go? And how to I connect the wires to the capacitor two terminal with...
Emerson motor condenser wiring replacing 3 wire motor with 5 wire.
[ 5 Answers ]
Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.
Emerson condenser fan motor
[ 5 Answers ]
I just replaced my condenser fan motor old one is a Emerson k55hxlrh-0208 1/5 hp 1.0 amps 208/220/240 volt 850rpm .The closes one I could get is 1/5 hp 208/230 volts 1.3 amps 1075 rpm now is shuts off in the miday heat
Change 4 wire condenser motor to 3 wire motor
[ 4 Answers ]
I need TO know how to wire a condenser motor. The one I am taking out is a 230 volt it has 2 brown capacitor wires and a black and white. The one I want to put in is a 230 volt/5 mfd capacitor motor. This one has a red wire a black wire and only one brown capacitor wire. How do I retrofit this.... View more questions Search
|