Ask Experts Questions for FREE Help !
Ask
    sg4145's Avatar
    sg4145 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 10, 2009, 08:11 AM
    Whirlpool Cabrio Dryer Won't Run.now what?
    I have a Whirlpool Cabrio that is less than a year old. When we try to run a load & press start, the sensing light comes on & nothing else happens... what gives?. any ideas?
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    May 10, 2009, 10:13 AM

    Model Number?

    Here's where you find the manuals for all Whirlpool products. You probably should start with that. I'd probably need a wiring schematic to trouble-shoot it. The schematic is probably in the top console of the dryer.

    Whirlpool Product Literature Search

    If it's less than a year old, it's probably under warranty.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Cabrio Dryer [ 16 Answers ]

We just had a new Whirlpool Cabrio washer and dryer (electric) installed today. I dried some towels and noticed an unusually loud humming and vibrating sound. I wouldn't expect this from a product with a "very good" noise rating rated by consumer reports. It's much louder than my old 17 year old...

Whirlpool dryer (Cabrio) [ 3 Answers ]

I have a Cabrio dryer and it keeps flashing AF. What does that mean and how can I fix the problem?:rolleyes:

What does the code AF mean on my whirlpool cabrio dryer? [ 4 Answers ]

What does the code AF on my whirlpool cabrio dryer mean?

Whirlpool Cabrio Dryer [ 17 Answers ]

We purchased new Whirlpool Cabrio Washer & Dryer set from Sears. The washer has worked fine, but the dryer has not. The dryer was delivered and had a small dent on the front of the door. When we put clothes in the dryer and start it, the dryer is extremely loud. It sometimes has a piercing...

Whirlpool Cabrio Dryer [ 2 Answers ]

A sponge fell down the opening of the "lint catcher" while it was out because I was removing back up lint. While the lint catcher fits back in, I do not know if it is dangerous to leave the sponge down there, and if so, I do not know how to get it out--tried with a hanger but couldn't catch on to...


View more questions Search