Ask Experts Questions for FREE Help !
Ask
    K-Dub's Avatar
    K-Dub Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2008, 01:50 PM
    Icemaker not cycling.
    Ice is frozen in tray and "arm" is down/on. Maker is not cycling. Simple solution?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Feb 9, 2008, 02:08 PM
    Sounds like the line could be clogged. Empty out the ice in the tray and see if it will fill up with water.

    Simple solution - use ice trays in the meantime LOL.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Feb 9, 2008, 03:19 PM
    The thermostat inside the icemaker itself could be bad. It is located at the rear of the module. Many times the module itself will go bad and need repaced
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ge icemaker adjustment [ 1 Answers ]

How do I adjust my icemaker in my side by side GE... hardly makes any ice

Icemaker not working [ 4 Answers ]

I have a whirlpool side by side refrigerator the ice mker stopped working there was ice froze in there but will not drop I took off the ice maker and got all the ice out it was a solid block I put it back and it gave me water but the same results I have power to my ice maker terminals but no power...

Icemaker water leak [ 2 Answers ]

I have a Maytag Admiral refrigerater with ice maker. The problem is when the ice maker calls for water, at the place where the water enters the ice maker there is a leak. This seems to be coming from just behind what looks like a little suction cup with the small water supply line connects to. Can...

Icemaker won't drop ice [ 2 Answers ]

We have a 3yr old SBS GE Artica Profile. The icemaker in it stopped dropping ice. When we pulled out the drawer, there was an ice mound stopping the lever arm. We defrosted the ice mound with a hair dryer. It has had time to cool down, and it has ice in the plate, but it will not drop to the...

View more questions Search