Ask Experts Questions for FREE Help !
Ask
    ALSHVAC's Avatar
    ALSHVAC Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2007, 08:10 PM
    Kenmore Calypso Elite Washer Code cl
    What is code cl?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 28, 2007, 04:57 AM
    Cl Average current limit Or
    Instantaneous current limit If a status signal comes back from the motor controller that a current limit has been breached, the unit will return to standby mode and display either CA for average current limit trip or Cl for instantaneous current limit trip.

    Average current trip occurs if there is a 2 second average of current draw greater than 5.55 amps at the motor windings.

    Instantaneous current trip occurs if there is a spike of 26 amps instantly at the motor windings.

    This may signify problems with the drive motor, thermal protector, or motor controller. Over-loading the unit may cause this problem.

    Press STOP/CANCEL to clear the display
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer Error Code F 26 [ 4 Answers ]

My Kenmore Elite HE 3t washer will not unlock and displays error code f 26. What does error code f 26 mean?

Kenmore elite calypso code ld [ 2 Answers ]

Can anyone tell me how to solve code LD on my kenmore elite calypso washer?it kept stopping.today I had to vacuum the water out.

Kenmore Elite Calypso Washing Machine, Model number 110.2206 [ 4 Answers ]

Would you please help me with the following issue? My washer is not draining, nor is it spinning. There is a lot of water collected at the bottom and I can't drain or spin? I try to restart it and it just beeps and rumbles for a couple seconds and then stops. Thank you so much in advance for...

Anyone with the code book for kenmore calypso elite? [ 1 Answers ]

Hey please help my clothes are smellingwasher isn't working. Shows ld ( long drain and I lost my dance test paper to trouble shoot it) I cleared it once before

Kenmore Elite Catalyst Washer OL err Code [ 1 Answers ]

I have a Kenmore Elite Catalyst Washer that is reading the error code OL. I do not have model number. I bought the washer and dryer from a used vendor I have looked everywhere for the model #, I guess they might have scratched it off? If anyone has an error code list of this washer...

View more questions Search