Ask Experts Questions for FREE Help !
Ask
    bdeere's Avatar
    bdeere Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2007, 09:12 AM
    GE gas stove F7 error
    Where is the board on this gas stove GE Spectra Profile XL44. I need to remove the board and use an eraser on the contacts. The F7 error message comes up with a beeping noise.
    Someone fixed this before this way but I wasn't there to see where it was.
    Thanks Bryan
    arnieg's Avatar
    arnieg Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Aug 29, 2008, 11:05 AM
    Use of an eraser to clean the contacts is only a temporary solution to the problem. A permanent fix was developed by Charlie Popeck, a professional engineer. It involves inserting a piece of paper between two ribbon cables to eliminate the possibility of short circuit between the two cables. The 30 minute procedure is described (including photos) at the web site

    The Dreaded "F7" Error - FixYa
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hooking up a gas stove [ 5 Answers ]

My gas stove is falling apart. I found basically the same gas oven used, but a few years newer than my current stove. I am going to pick it up tomorrow. I was wondering if it would be all right for me to hook up the gas line. Is it as simple as turning off the gas line, unscrewing the hose and...

Old Gas Stove [ 1 Answers ]

I just moved into an apartment with a match-light oven. Can someone tell me how to light it? Thanks! Eric

View more questions Search