My Husky power washer 1750 motor will not shut off. Motor runs continuously even after squeezing handle. I have not pressure with high pressure nozzle; however, the variable nozzle seems to have better pressure. Help!! Thanks, Melissa

My husky powerwasher cycles on and off in approx 30 second cycles. How can I keep it running. I have tried taking the wand (nozzle) out and the unit runs fine. Is it just the wand that has worn out of been damaged? Vic

Have done every check to determine the cause of the water not coming from the gun but tocheck the pump seal. The website advisory suggests opening the front to check the pump.Also in addition to the gun not putting out any water there appears to be water leak underneath the machine coming from the...

My husky 1750 power washer won't start. The G F I plug lights up red when you turn on the power the washer won't start and the plug doesn't trip. The washer was working fine just quit like it has no power.

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...