Mod# MDG4000AWW. Ser# 10785892WD. I removed vent and front panel. When start dryer, it clicks a couple times then the glow plug lights and the gas flames for about 10-15 seconds- then off. about 30-40 seconds repeats with shorter duration but adaquate flame. This second cycle repeats as long as you want. I saw earlier post that was simular except flame quit lighting. I suspect flame sensor. How do I verify. I do have multimeter but don't know specs to look for. Help is appreciated.

esquire1

Clean the sensor. IF this does not correct the problem, replace the coils in the gas valve

ge1k

Thanks for the quick reply. I'll get right to it.

esquire1

Glad you got it going. Come back to this site often.