Ask Experts Questions for FREE Help !
Ask

Kenmore Electric Dryer Series 80 start button - won't start

Asked Jun 29, 2012, 06:35 PM — 7 Answers
Tonight I replaced the Door Switch - easy enough - and the inside light works once again. But now the push button to start the dryer does not work. Do I need to replace the blower box fuse and thermal fuse? What I thought began as a quick fix has now become a mystery. Can You Help ?
Model No. 110 628521101
I have been watching You Tube videos on Repairs etc.
thank you

Search this Thread
Share |
7 Answers
Stratmando's Avatar
Stratmando Posts: 10,434, Reputation: 2520
Uber Member
  
#2

Jun 29, 2012, 06:52 PM
See if you can hear the door switch, it may be bad?
Helpful
drtom4444's Avatar
drtom4444 Posts: 2,325, Reputation: 461
Ultra Member
  
#3

Jun 30, 2012, 10:20 AM
You have to use a meter to find the bad safety. My guess is that it's dirty and you blew a thermal fuse. Since there are several you will need a meter to find the right one. Here are instructions: https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf You cannot diagnose problems without using a meter, it's very basic.
Here are manuals: https://dl.dropbox.com/u/8010163/Whirlpool%20Dryers.zip
Make sure to clean every part of the dryer and the vent or you will burn out another fuse or cause a fire. Also, you should change the belt if it's over two years old when you tear it down and lubricate all bearings with white lithium grease.
Helpful
Duncan88's Avatar
Duncan88 Posts: 4, Reputation: 1
New Member
  
#4

Jun 30, 2012, 07:30 PM
Thank you Stratmando: the door switch did not click - I rechecked and noticed I needed to flip it around - backwards. My dryer works now.

Thank you drtom4444 - I made sure everything was cleaned inside the dryer - its free of lint.
Helpful
Duncan88's Avatar
Duncan88 Posts: 4, Reputation: 1
New Member
  
#5

Jun 30, 2012, 07:32 PM
Quote:
Originally Posted by Stratmando View Post
See if you can hear the door switch, it may be bad?
Thank you - I installed door switch backwards - now it clicks and the dryer works.
Helpful
Duncan88's Avatar
Duncan88 Posts: 4, Reputation: 1
New Member
  
#6

Jun 30, 2012, 07:35 PM
Quote:
Originally Posted by drtom4444 View Post
You have to use a meter to find the bad safety. My guess is that it's dirty and you blew a thermal fuse. Since there are several you will need a meter to find the right one. Here are instructions: https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf You cannot diagnose problems without using a meter, it's very basic.
Here are manuals: https://dl.dropbox.com/u/8010163/Whirlpool%20Dryers.zip
Make sure to clean every part of the dryer and the vent or you will burn out another fuse or cause a fire. Also, you should change the belt if it's over two years old when you tear it down and lubricate all bearings with white lithium grease.
Thank you. My door switch was on backwards. I did clean my dryer behind the back panel - it is lint free.
Helpful
Stratmando's Avatar
Stratmando Posts: 10,434, Reputation: 2520
Uber Member
  
#7

Jul 1, 2012, 06:18 AM
Good Deal,
Also good advice from the DR.
Helpful
drtom4444's Avatar
drtom4444 Posts: 2,325, Reputation: 461
Ultra Member
  
#8

Jul 1, 2012, 06:23 AM
You have to clean all of the air ducts like the lint screen holder and the duct that brings air to the drum or it will burn out the safeties or start a fire. You have to disassemble the entire dryer to clean it right. Using a meter will make repairing the dryer, or any other appliance, much easier.
Helpful
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Kenmore electric dryer won't start; timer clicks but drum doesn't start turning [ 2 Answers ]

I used an ohmeter to check start button, thermal fuse, timer, thermostats and they all check out ok. I'm afraid it's the motor and don't know how to get to it to test with ohmeter.

My Kenmore 80 Series won't start. I can hear it tick when I hold the button down. [ 0 Answers ]

The door assembly seems to be fine and the light works and shuts off when you close the door. Any suggestions on where to start trouble shooting? Thanks

Kenmore dryer won't start when I push the start button [ 1 Answers ]

kenmore dryer won't start when i push the start button

Kenmore dryer won't start could be start button or timer [ 1 Answers ]

Please help me with this. My dryer was working good and now it won't start at all.

Kenmore 90 series, start button stopped working [ 1 Answers ]

A few days ago my girlfriend complained that the dryer wasn't working properly. She said that she hit the START button and it wouldn't start. But then followed later with, I checked the door and it's fine. Yesterday I am doing laundry and the dryer is running fine for the first three loads....

View more Appliances questions Search