Ask Experts Questions for FREE Help !
Ask
    mrose55's Avatar
    mrose55 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2009, 06:26 PM
    My kenmore dryer overheats and shuts off
    My dryer gets really hot on the outside and shuts off before the cycle is done.

    Thanks

    Michele
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Sep 24, 2009, 02:59 AM

    Michele -

    It sounds like it is overheating and the thermal cutout is shutting it off. I would pull the dryer out from the wall and take a look at the vent pipe and make sure it is clear of lint. Look back into the dryer and forward down the pipe towards the outside--make it as clean as possible. This lint can catch fire.

    Best of luck,
    WallyH
    mrose55's Avatar
    mrose55 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Sep 24, 2009, 06:04 PM
    The vent is brand new. The reason I got the dryer is that mine quite working. When I plugged in the new one it didn't work either. I checked all the wiring at my home and found out that the white wire to the outlet did not have a good connection. I fixed it and plugged in the dryer and it worked but now it gets hot. Do you think it's the wiring? I just got the dryer from a friend. Her washer broke so she bought a new set. Nothing was wrong with the dryer. It's only about 5 years old. When I got it, it had a four wire plug and I changed it to a three wire. Also, I've check the thermal fuse and thermostat and they check out fine. I don't know what else to do.

    Thanks
    Michele
    cjunkdlr's Avatar
    cjunkdlr Posts: 11, Reputation: 1
    New Member
    		  
    #4

    Sep 27, 2009, 03:30 AM

    Always need to know Gas or Electric dryer?
    Run the machine with the 4" vent pipe disconnected from the wall. You should get a good hard blow of air out if you don't the filter housing, the blower housing, or the tunnel is clogged. If you do then I'd change the high limit thermostat on the burner tunnel
    mrose55's Avatar
    mrose55 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Sep 27, 2009, 08:53 AM

    It's Electric. Thank you, I'll try that.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #6

    Sep 29, 2009, 02:59 PM
    Quote Originally Posted by mrose55 View Post
    The vent is brand new. The reason I got the dryer is that mine quite working. When I plugged in the new one it didn't work either. I checked all the wiring at my home and found out that the white wire to the outlet did not have a good connection. I fixed it and plugged in the dryer and it worked but now it gets hot. Do you think it's the wiring? I just got the dryer from a friend. Her washer broke so she bought a new set. Nothing was wrong with the dryer. It's only about 5 years old. When I got it, it had a four wire plug and I changed it to a three wire. Also, I've check the thermal fuse and thermostat and they check out fine. I don't know what else to do.

    Thanks
    Michele
    Just got back in town...
    Wow, you sound handy! :)
    Two things come to my mind.
    1. The dryer vent is new
      I'm assuming you mean the flexible pipe that connects the dryer to the wall. If this is true, then I still want you to check inside the wall for lint. This can be difficult. If you can see where the vent exhausts to the outside, see if you get a good flow of air out of it when the dryer is running.
    2. The dryer was switched from 4-wire to 3-wire
      Can you say precisely how you wired the dryer? It is possible that there is a problem here.


    Best of luck. Most of all, be careful.
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore gas dryer gets hot for a few minutes, then shuts off [ 1 Answers ]

Greetings, I have a Kenmore 80 series gas dryer that is about 5 or 6 years old. When starting to drya load, the burner comes on and everything seems to work like normal. After about 5 or 6 minutes, the burner shuts itself off and there is suddenly no heat. I've checked the air flow in the vents,...

Hotpoint dryer overheats & shuts off [ 1 Answers ]

My Hotpoint clothes dryer gets really hot to the touch on the back of the appliance. This happens while in use, then the dryer will shut off on it's own & cool down. It also happens when not in use but does not shut down so I have to keep it unplugged. Anyone have any advice as to how I can fix...

Kenmore 80 series dryer starts with hum and then shuts off, why? [ 1 Answers ]

My Dryer starts and runs for approximately 2-3 minutes, all-the-while making a humming noise that progressively gets louder which indicates that it will shut off soon. Where do I start troubleshooting?

Kenmore dryer shuts off repeatl [ 4 Answers ]

Dryer shutoff repeatedly. Drum turns whenever door is open. Dryer will run for 3 to 4 minutes and shutdown

View more questions Search