 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Dryer Model 110.76512695
Can Anyone Tell Me What I Could Possibly Do To Fix My Dryer... here Is What It Is Doing... when I Turn It On It Sometimes Heats For Like 10 Or 20 Seconds And Then The Flame Goes Away And Its Cold Again... its Intermitent... sometimes Heats For 5/10 Minutes And Then Off And Then On?? Help!. any Suggestions Would Be Greatly Apprciated:):d
|
||||
Check out some similar questions!
I have the Kenmore Elite King Size Washer, Model#110.82873120. Last night it quit working on the "Spin" cycle. I can still hear and feel the cycle operating, but there is a "clicking" that goes on and the agitator doesn't spin, nor does it agitate during the cycle. The draining mechanism...
Can anyone tell me how to get the TOP off this machine? So far I've tried to pry if off with no success. There aren't any "clips" that I can see... but I can see two screws that are impossible to get to. I have to replace a Bleach Hose that was cut in half by the drum... But I sure can't see how...
Hello, I was 3 minutes into a the washing cycle and it was making a sound like it was out of balance. I lifted the lid, adjusted the towels and shut the lid. It will not start. Not on any setting. It will click when I turn the dial like it wants to chance cycles, but nothing happens. Now, I...
My dryer stopped heating although it runs. I confirmed I was getting 240volts at the source. I checked the continuity of the element, the thermal fuse and the thermostat and found that they were continuous. I have read that the thermistor might have something to do with it...
My 3-yr.old Kenmore Elite Gas dryer has been doing very odd things! After running a load, when the dryer shuts off, or I shut it off (clear it), the touch control panel goes dead. No lights are lit. If you push the touch pad for various cycles it will not do anything. You can also push...
View more questions Search
Add your answer here.
|
