Ask Experts Questions for FREE Help !
Ask
    rallmond's Avatar
    rallmond Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 24, 2007, 09:53 AM
    Kenmore Dishwasher failure codes?
    Our Kenmore dishwasher Model 66516032400 will not run. The "Clean" lamp which normally lights to show that a load is done is now flashing a seven flash sequence.Does anyone out there know what this is telling us??
    Thank you
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 24, 2007, 10:12 AM
    There should be a period somewhere in that model number. Recheck it and get back to us with the complete model # plus periods and any dashes.
    bevmartinphillips's Avatar
    bevmartinphillips Posts: 8, Reputation: 1
    New Member
    		  
    #3

    May 4, 2007, 04:54 PM
    Just hit the normal wash and heated dry buttons back and forth several times. The panel will light up and reset...
    I wish my problem was that easy. MY dishwasher won't go past wash sensing, just keeps going!!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher [ 1 Answers ]

My dishwasher recently tripped my circuit breaker and my dishwasher was stuck in dry mode. I reset the circuit breaker and it kept getting stuck in the dry cycle. My spin device in the bottom of the dishwasher melted to the heating coil so I replaced the spinner. I then repaired the timing motor so...

Kenmore Dishwasher [ 1 Answers ]

Hello, I have an older model Kenmore dishwasher which is no longer washing the dishes clean. What is the most cost-effective method; to repair or replace? Please advise.

Ge dishwasher - water pump failure? [ 2 Answers ]

@ 2000 GE potscrubber It will fill with water, and drain, but it hums like an electrical motor is stuck, and no water pressure is making it to the rotator bar. Is there a pressure pump that may have failed? It appears to do everything, but spray water. Any ideas welcome. TIA Alex

View more questions Search