Ask Experts Questions for FREE Help !
Ask
    mdvalos2000's Avatar
    mdvalos2000 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 21, 2009, 05:44 AM
    Intertherm gas furnace issues
    My intertherm gas furnace model #g4ra096c-16 the fan does not run regardless if the thermostat switch is in the auto or manual position, on top of that the burners will only stay on for about three seconds after startup where do I start looking for the cause of these problems

Check out some similar questions!

Carrier gas furnace code 31 [ 3 Answers ]

Hi. I have a Carrier gas (propane) furnace 58MCA100-11116 series 111. It shows a code 31. The evacuation blower runs for a short time then kicks off. The burners do not ignite. To date I have: replaced the pressure switch, checked in and out lines to the pressure switch for obstruction,...

Thermopride gas furnace [ 1 Answers ]

Yes everything works.but it is all eletronic ,I replace a new motor today,but the frame don't want goes on

Thermopride gas furnace [ 2 Answers ]

I have a furnace thermopride natural gas with blower, about 12 year old ! The furnace does have a eletronic ign,turn on but the frame don't come on ,the machine keep doing that fill time and don't fire up ! U have idea what the problem?? thank you

Gas Furnace won't Light [ 1 Answers ]

I am trying to light my gas furnace in my house but it won't light. I light the pilot and when I turn the dial to on the flame goes away and no gas in going through! What am I forgetting or doing wrong?

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.