Check out some similar questions!
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Hunter ceiling fan / light w/remote wiring
[ 4 Answers ]
I have a Hunter ceiling 3 speed fan with light that uses a remote control. The fixture was removed for ceiling painting and now I can not get it wired correctly. From the fixture there are 4 colored wires that match the 4 colored wires for the relay box inside the canopy. Also from the fixture is a...
Hunter Ceiling Fan/Light w/remote installation
[ 11 Answers ]
Hello, I am have a hunter ceiling fan and I am having trouble installing this correctly. From the ceiling of the wall I have 4 wires (Red/ Black/ White/ and bare Copper). From the fan there is are only 3 (Black/ White / Green). Please assist me with installing this fan. I have tripped the...
Hunter Ceiling Fan - Light Works, Fan Does Not
[ 1 Answers ]
I installed the ceiling fan about 4 years ago. We use a remote to control it. Recently, the fan is no longer turning on with the remote, but the light works with the same remote. As the fan is on a high ceiling, I need a tall ladder to get to it - so, I'm trying to find the answer or possible...
Hunter Ceiling Fan Remote Light Kit
[ 1 Answers ]
I've got a Hunter Ceiling fan with remote fan/light kit. All was working fine until I replaced a bulb. I did not, (I found later) use the recommended bulb. When I turned the light on, it came on but looked funny. Once I turned it off then back on, it would not light. I tried then replacing with a... View more questions Search
Add your answer here.
|