This dryer is a little different from others. The motor is in the rear, and the front is very hard to remove. I have the top off, no problem, but can't reach the screws holding the front on. They are way down the side, and access is very limited. To remove the hinged front cover, the top screws I...

How do I replace the belt on my TVR2 Creda Tumble Dryer?

I got this dryer disassembled from a guy who tried to fix it, said it shut off. I got it all back together and it runs good but gets way too hot. I checked for air blockage, airflow SEEMS fine, I do have a 90 degree bend in the exhaust tube, but don't think it's enough to cause the...

Hi knowledgeable people! :) How do I change the bearings on a Hotpoint 1000 plus 9534 washing machine? I know it's an old model but I'm sure it still has some life in it yet! Does the drum have to come out and if so, how is that done? :confused: Any advice will be most appreciated! Thanks

undefinedundefined I replaced the igniter on my gas dryer as it was crumbling anyway. That was my first thought as to why my dryer may not be heating up. Guess what, that wasn't the problem. The dryer just quit heating all of the sudden and as I said I thought the igniter may be the problem. As we...