 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas dryer not drying
I have a maytag gas dryer and it stopped drying, so I opened the front and I see that the igniter glows and the flame comes on for a about thirty seconds and then after a while it glows again but no flame, I took off the back vent pipe, and I changed the igniter, what else can it be?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have had this dryer for at least 10 years and it just now started to give me problems. I put it on for 180 minutes, regular dry and it heats but not enough to get the clothes dry... I have to add another 20 to 30 minutes to get them totally dry... Is it time for a new dryer or can I save this...
I have a GE dryer that doesn't seem to dry all the way. I've cracked it open and cleaned out all the dust buildup from the vents (there was quite a bit) and the blower moter and blades. Should be clean as a whistle now. The heating element was clean and shows no cracks and looks to heat up OK...
I Have A Whirlpool Dryer And It Is Not Drying The Clothes At A Very Fast Rate. I Have To Run A Regular Size Load Through The Cycle Two Times Before They Are Dry. My Vent Is Kind Of Weird, Where My Laundry Room Is The Vent Has To Run Up Through The Roof And I Don't Know If This Has Something To Do...
My frigidaire dryer is heating but not drying in the appropriate time. It takes forever for the clothes to dry. Could this be the heating element?
View more questions Search
|
